English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
3m Filtration System Machine for Filtration Bonding Industry
3m filtration system machine for filtration bonding industryWhere to buy PU , epoxy bonding machine for filtration ? We
Description
Basic Info.
| Model NO. | PGB-700 |
| Installation | Vertical |
| Driven Type | Electric |
| Transport Package | Polywood Cases |
| Specification | 700x700x100 |
| Trademark | D&H |
| Origin | China |
| HS Code | 8424899990 |
| Production Capacity | 100 |
Product Description
3m filtration system machine for filtration bonding industryWhere to buy PU , epoxy bonding machine for filtration ?
We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress. We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .Bonding of HEPA filters for interior ventilation systemsHEPA (high-efficiency particulate air) filters Antimicrobial seals for air conditioning cycling system Low-emission seals for car interiors and oil filter system ULPA (ultra-low particulate air) filters application EPA (efficient particulate air) filter
Filter products gluing requirements :
Adhesives for using in filter manufacturing and the following are descriptions of four physical properties which are the most important factors that should be considered Hardness, viscosity, pot life and percentage of solids.Using adhesives to fabricate numerous filter components to assemble the filter media itself, bond the filter media into a frame or end cap or install the gasket need .
Pot requirement of the filtration proudcts:
Two-component adhesives, such as epoxies and some polyurethanes, must be mixed at theplant. Pot life (or liquid life) is an indication of how long these two-part adhesives remain usable once mixed. Both quantity and temperature of the adhesive mixture influence pot life. For example, a quantity of adhesive in a cup will build up heat and cure more quickly - and therefore have a shorter pot life - than the same amount spread into a thin film.Increasing the temperature of the mixture will also shorten pot life.Two component metering mixing and potting machine can very well to solve this problem.The amount of glue can be mixed according to the requirements at will, which can be freely set on the equipment. The glue can be mixed while producing the product, without wasting the adhesive, and the bonding requirements can be efficiently achieved.The equipment contains a heating function, and the required temperature can be set to achieve the bonding requirements for the product easily.Common types of adhesives
1)Thermosetting adhesivesThermosetting adhesives typically cure through the chemical reaction of two components or exposure to heat. Once cured, the adhesive becomes inert. These adhesives tend to have good heat and chemical resistance and are well suited to applications that require strength under varied conditions. Two common thermosets are epoxy resins and polyurethanes.2)Epoxy resinsOne- and two-part epoxy resins are widely used in filter fabrication for a variety of applications. Most are very rigid in thecured state and adhere well to metal. Although they offer high temperature and chemical resistance, epoxy resins can be relativelycostly and often cure slowly.3)PolyurethanesAdhesive manufacturers offer a broad array of polyurethane adhesives, in varying colours, cure rates, viscosities and hardness levels. Although available in one-part formulations, two-part polyurethanes are better suited to filter applications. Whereas one-part formulations rely on moisture in the substrates and air to cure, two-part polyurethanes cure through a reaction when the two components are combined. Most two-part polyurethanes cure at room temperature but can be heat accelerated. Harder polyurethanes can be used to assemble the filter media into a metal or plastic frame or end cap or cast as those components. Softer versions can serve as a seal between a filter and its housing, eliminating the need for a separate gasket. Polyurethanes lack resistance to some chemicals and solvents so are best used with water, air and oil filters.Equipment recommended :Applying adhesives for industrial uses is not always as easy as picking up a bottle of glue and squeezing. Two-part adhesives require mixing, and many adhesives used in filter fabrication require separate dispensers.No matter what resin you are going to use , our company have the indispensable metering mixing dispensing equipment for the applications .The following mixing and dispensing two-part adhesives.
Simple mixing machine ,Semi-automatic mixing machine
PJL Serious machine example : PJL-800,PJL-1200 ,JYPJ-1000, PJL-1500The easiest method is to carefully measure the two components by weight or volume to mixexactly the amount needed ,then operate hold the dispensing gun to apply mixture into proudcts' position where require bonding and potting .
| ITEM | Parameter |
| Mixing ratio | 1:1--10:1 adjustable |
| Working range | Can be Customized |
| Out-glue speed | 1-12g/s per single pump ; the output volume is decided by mixing ratio |
| Accuracy | ±2%(output volume)±2%(mixing) |
| tolerance | ≤0.2mm |
| Flow control | Digital input |
| Program memory | 20pcs |
| Automatic controlling system | Touch screen (to achieve program programming, modification, storage and so on |
| Out-glue control system | AB glue back suction valve, achieve AB glue independent operation |
| Mixing method | dynamic mixing |
| Power supply | 220V/50Hz/1500W without heating |
| Air source | 0.5-0.8Mpa |
| Viscosity range | 50-20000cps |
| A tank | 10L 25L 40L stainless tank(optional) |
| B tank | 10L 25L 40L stainless tank(optional) |
| Others | AB tank ,A pump,AB pipeline heating function |
Meter mix systems with XYY movable system (Automatic gluing dispensing machine )
PGB serious such like PGB-700 ,PGB-1200,PGB-1500,PGB-2250....This equipment is designed to mix and dispense adhesives accurately and apply resin to filter accurately by 3-axis dispensing robot.Some machines dispense only one mix ratio, while our machine can cover a range of ratios.The filter manufacturer can quickly recoups the investment through using our equipment , since the high productivity can savings the cost for bulk production.| ITEM | Parameter |
| Mixing ratio | 1:1--10:1 adjustable |
| Working range | Can be customized |
| Displacement speed | 250mm/s(speed) |
| Out-glue speed | 1-12g/s per single pump |
| Accuracy | ±2%(output volume)±2%(mixing) |
| tolerance | ≤0.2mm |
| Flow control | Digital input |
| Program memory | 99pcs-999pcs |
| Motion trail | Dot , line ,curve ,circle |
| Automatic controlling system | Touch screen (to achieve program programming, modification, storage and so on |
| Out-glue control system | AB glue back suction valve, achieve AB glue independent operation |
| Programmatically | Tech programming/or computer systems (Micro software Windows 7,Windows10 optional) |
| Mixing method | dynamic mixing |
| Power supply | 220V/50Hz/1500W without heating |
| Air source | 0.5-0.8Mpa |
| Viscosity range | 50-20000cps |
| Outer dimension | 1500L*1200W*1600H mm |
| A tank | 10L 25L 40L stainless tank(optional) |
| B tank | 10L 25L 40L stainless tank(optional) |
| Others | AB tank ,A pump,AB pipeline heating function |
Our Contact
Send now
